Epiphan Lecture Recorder x2 Specifikace stáhnout pdf (Strana 55)

Lecture Recorder x2 User Guide 2-3 Configure an audio source

3. From the web interface, scroll to the channel section and click the channel to which you want to

configure audio settings; the menu expands.

4. Click Stream Setup; the Stream setup configuration page opens.

5. Scroll to Audio settings.

6. Check Enable audio check box.

7. If the default audio format (PCM 22KHz) is not desired, click the Audio format drop-down menu to elect

an audio codec. See Fine-tune channel configuration for help choosing one of the supported audio

codecs.

8. Click on the Audio channels drop-down menu to choose mono (1 channel) or stereo (2 channels).

9. Click on the Audio bitrate drop-down menu to choose the audio transmission speed. Increasing this

value produces better sound quality but uses more system processing power and bandwidth.

10. Click Apply.

Set audio volume

To set audio volume (not this is done on the encoder, and not the VGAGrid):

1. Ensure an audio input source is connected to an audio input port.

2. Connect to the admin interface using your preferred connection method. See Connect to the Admin

Interface.

3. Login as admin.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 207 208

Žádné komentáře

Epiphan Lecture Recorder x2 Specifikace Strana 55